Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

CRESTRON HD-RX-4K-510-C-E 4K 5x1 AV Switch

Forsiden AV Infrastruktur Switche HDMI CRESTRON HD-RX-4K-510-C-E 4K 5x1 AV Switch
For at se vore priser skal du være oprettet som kunde: Er du allerede oprettet som kunde skal du logge ind.
CRESTRON HD-RX-4K-510-C-E 4K 5x1 AV Switch (HD-RX-4K-510-C-E)
CRESTRON HD-RX-4K-510-C-E 4K 5x1 AV Switch (HD-RX-4K-510-C-E)
CRESTRON HD-RX-4K-510-C-E 4K 5x1 AV Switch (HD-RX-4K-510-C-E)
CRESTRON HD-RX-4K-510-C-E 4K 5x1 AV Switch (HD-RX-4K-510-C-E)

CRESTRON HD-RX-4K-510-C-E 4K 5x1 AV Switch

Varenr.:
HD-RX-4K-510-C-E

HD-RX-4K-510-C-E - 4K Multiformat 5x1 AV Switch and Receiver Compatible with all DM Lite™ transmitters. Features three DM Lite inputs, two HDMI® inputs, and one scaling HDMI output. Includes amplified audio outputs for speakers, five analog audio inputs, and two analog audio outputs. Also includes IR, RS-232, relay, I/O, and Ethernet control ports. Supports .AV Framework technology.
Beskrivelse

The Crestron® HD‑RX‑4K‑510‑C‑E multiformat AV switch and receiver provides enhanced HDMI® video switching and audio presentation capabilities in areas such as conference rooms and classrooms. Compatible with all DM Lite™ transmitters, the HD‑RX‑4K‑510‑C‑E provides three DM Lite inputs for connection to up to three transmitters. A CATx (CAT5e or higher) twisted pair cable connects a transmitter to the HD‑RX‑4K‑510‑C‑E for the transmission of HDMI signals. For resolutions up to 2K, the maximum transmission distance is 230 ft (70 m). For higher resolutions up to 4K, the maximum transmission distance is 130 ft (40 m).1


NOTE: Power is transmitted over the CATx cable that connects the HD‑RX‑4K‑510‑C‑E to a DM Lite transmitter. The HD‑RX‑4K‑510‑C‑E can power three transmitters simultaneously.

In addition to three DM Lite inputs, the HD‑RX‑4K‑510‑C‑E provides two HDMI inputs that can be connected to local AV sources.

Automatic Switching of Inputs
Automatic switching among the DM Lite and HDMI inputs can occur based on the last connected input. Switching behavior is configurable using the web interface or programmable using a Crestron control system. In addition, input selection push buttons on the front panel of the HD‑RX‑4K‑510‑C‑E allow the desired input to be selected manually.

HDMI Output with 4K Scaler
A single HDMI output with a built-in scaler connects to a display or other device with an HDMI input.2 Input resolutions are automatically scaled to match the native resolution of the display device, resulting in optimal image quality. For applications requiring comprehensive EDID management, the web interface can be used to ensure that every input is displayed at its optimal resolution and format. Input resolutions up to 4K60 4:2:0 are supported.

Enhanced Audio Capabilities
The HD‑RX‑4K‑510‑C‑E includes a built-in amplifier that can drive a pair of 4- or 8-ohm stereo speakers (25 W per channel). The HD‑RX‑4K‑510‑C‑E also provides 6x2 audio mixing capability. Embedded HDMI 2-channel LPCM audio can be extracted from the selected DM Lite or HDMI input and combined with the five analog audio inputs (LINE 1, LINE 2, MIC 1, MIC 2, and AUX). Gain and mute sound adjustments can be made to each of the six inputs being mixed. The mixed audio is then transmitted as two audio outputs: one mirrored AUX 1, SPEAKER, HDMI mixer output and one AUX 2 output. Audio mixer settings such as volume and mute control are configurable for each of the two outputs independently.

Device Control
Equipped with onboard control ports, the HD‑RX‑4K‑510‑C‑E can control various devices in a room. The COM (RS-232) port and CEC over the HDMI output can enable the display device to be turned on or off automatically without the use of a control system. With the use of a control system, the IR port can also control the display device. Two relay ports are provided for controlling a projection screen and other low-voltage contact-closure activated equipment. Two Versiport I/O ports enable the integration of devices such as power sensors and motion detectors. An Ethernet port connection to a LAN also provides control by enabling use of the built-in web interface as well as connection to a control system.

NOTE: The IR, COM, and Ethernet ports cannot be used to extend signals over a DM Lite connection.

.AV Framework™ Technology Support
In addition to a built-in web interface and control system programming, the built-in .AV Framework technology of the MPC3-201 and MPC3-302 control systems can be used to control the HD‑RX‑4K‑510‑C‑E as a switcher. (For information about .AV Framework technology, visit www.crestron.com/avframework.)

Crestron XiO Cloud™ Service Support
The HD‑RX‑4K‑510‑C‑E is compatible with the Crestron XiO Cloud service, which is an IoT (Internet of Things) based platform for remotely provisioning, monitoring, and managing Crestron devices across an enterprise or an entire client base. The service enables installers and IT managers to deploy and manage thousands of devices in the amount of time it would ordinarily take to manage a single device. For more information, visit www.crestron.com/xiocloud.

Compact Design
Compact in design, the HD‑RX‑4K‑510‑C‑E can be mounted onto a flat surface such as a wall or attached to the underside of a table.  

Key Features
  • 4K/60 4:2:0 capability
  • Three DM Lite™ ports for interoperability with up to three DM Lite transmitters
  • Two HDMI® inputs
  • One HDMI output with 4K scaler
  • Gigabit Ethernet port
  • Two stereo line level inputs, two mono microphone inputs, and one mono auxiliary audio input
  • Built-in amplifier with 25 W per channel for 4- or 8-ohm stereo speakers
  • Two stereo auxiliary outputs
  • IR, RS-232, relay, and I/O control ports
  • CEC (Consumer Electronics Control) capability
  • Automatic switching of inputs
  • 6x2 audio mixing capability
  • EDID management
  • HDCP management including HDCP 2.2 support
  • Built-in web interface for easy configuration and monitoring
  • Compatibility with Crestron® 3-Series® or later control systems
  • .AV Framework™ technology support
  • Crestron XiO Cloud™ service support
  • Compact surface-mount design

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.