Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

Biamp TesiraFORTÈ m/Dante DSP12/8 + 8 USB

Forsiden Lyd DSP Biamp TesiraFORTÈ m/Dante DSP12/8 + 8 USB
For at se vore priser skal du være oprettet som kunde: Er du allerede oprettet som kunde skal du logge ind.
Biamp TesiraFORTÈ m/Dante DSP12/8 + 8 USB (BI-FORTEAIDAN)
Biamp TesiraFORTÈ m/Dante DSP12/8 + 8 USB (BI-FORTEAIDAN)
Biamp TesiraFORTÈ m/Dante DSP12/8 + 8 USB (BI-FORTEAIDAN)
Biamp TesiraFORTÈ m/Dante DSP12/8 + 8 USB (BI-FORTEAIDAN)

Biamp TesiraFORTÈ m/Dante DSP12/8 + 8 USB

Varenr.:
BI-FORTEAIDAN

Biamp FORTE-AIDAN DSP Matrix Med 12/8+8USB Med Dante
Beskrivelse

TESIRAFORTÉ® DAN AI FIXED I/O DSP

TesiraFORTÉ® DAN AI is a fixed I/O DSP with 32 bi-directional channels of Dante™ digital audio, 12 analog inputs, 8 analog outputs, and includes up to 8 channels of configurable USB audio. USB audio allows TesiraFORTÉ to interface directly with USB audio hosts, as well as to take full advantage of today’s most sophisticated conferencing solutions. TesiraFORTÉ DAN AI provides extensive audio processing, including but not limited to: signal routing and mixing, equalization, filtering, dynamics, and delay; as well as control, monitoring, and diagnostic tools; all configured through the Tesira software. TesiraFORTÉ DAN AI is bestsuited for small- to medium-sized rooms that require high-quality audio solutions using voice lift and mixminus, such as conference rooms or council chambers.

BENEFITS

• Includes default configuration file, allowing for plug-and-play usage
• Highly scalable and cost-effective solution that can grow over time with the needs of the customer
• SpeechSense™ technology enhances speech processing
• Integrates directly with soft codecs and other USB audio hosts

FEATURES

• 32 x 32 channels of digital audio networking via the
Dante protocol
• AES67-enabled Dante endpoint
• 12 mic/line level inputs, 8 mic/line level outputs
• 2 Gigabit Ethernet ports: Dante digital audio and Tesira
control
• Up to 8 channels of configurable USB audio
• RS-232 serial port
• 4-pin GPIO
• 2-line OLED display with capacitive-touch navigation
• Supports port authentication via IEEE 802.1X
• Rack mountable (1RU)
• System configuration and control via Ethernet
• Internal universal power supply
• Signal processing via intuitive software allows
configuration and control for signal routing, mixing,
equalization, filtering, delay and much more
• CE marked, UL listed, and RoHS compliant
• Covered by Biamp Systems’ 5-year warranty

ARCHITECTS & ENGINEERS SPECIFICATION

The fixed I/O DSP shall be designed exclusively for use with Tesira® systems. The fixed I/O DSP shall support Dante™ digital audio networking that shall allow up to 32 x 32 channels. The Dante networking connection shall be implemented on a RJ-45 connector. The fixed I/O DSP shall be interoperable in accordance with the AES67 standard. The fixed I/O DSP shall support Ethernet connection for programming and control on a RJ-45 connector. The fixed I/O DSP shall have internal DSP processing. The fixed I/O DSP shall include 4 channels of General Purpose Input and Output connection (GPIO) for sending or receiving logic signals. The programming of the GPIO ports shall be software configurable. The fixed I/O DSP shall include a RS-232 connection for control data transmission into or out of the fixed I/O DSP and such operation shall be software programmable. The fixed I/O DSP shall include a Universal Serial Bus (USB) connection on a standard USB-B type connector. The fixed I/O DSP shall be software configurable to stream up to 8 channels of digital USB Class 1 Audio transmission either into or out of the fixed I/O DSP or simultaneous input and output. The fixed I/O DSP shall support port authentication via IEEE 802.1X. The fixed I/O DSP shall provide 12 balanced input connections for receiving of microphone or line level analog audio signals on screw-down, removable connectors. The fixed I/O DSP shall provide 8 balanced output channels for the transmission of microphone or line level analog audio signals on screw-down, removable connectors. Each individual channel shall have its own dedicated connection. The fixed I/O DSP shall provide front panel OLED identification of device power, status, alarm, and activity as well as system-wide alarm. The fixed I/O DSP shall be rack mountable (1RU) and feature software-configurable signal processing, including but not limited to: signal routing and mixing, equalization, filtering, dynamics, and delay, as well as control, monitoring, and diagnostic tools. The fixed I/O DSP shall be CE marked, UL listed, and shall be compliant with the RoHS directive. Warranty shall be five years. The fixed I/O DSP shall be TesiraFORTÉ® DAN AI.

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.